2500.00 $ Raytech Fast Finisher Tumbler Cardiff

Published date: February 22, 2017
  • Location: Cardiff, Alabama, United States

Raytech Fast Finisher Tumbler


⭕ Well maintained tumbler is up for sale, more info from the Raytech website is available below:

The Raytech AVT-250 System will handle a myriad of applications including deburring, descaling, flash removal, cleaning, polishing, and burnishing. It has a capacity of 2.5 cubic feet.

Cabinet Construction: 14 gauge formed, reinforced and welded steel; complete sound insulation with cover to keep noise level below 80 db.

Tub Construction: Continuous welded tub of 11 gauge steel with one-quarter inch steel angle reinforcements; 80-90 durometer urethane lining of one-half inch minimum up to one inch in wear areas; 5-inch urethane discharge chute; easily changed 2.5 x 5-inch drain.

Drive System: 1-inch steel shaft with high energy counterweight; heavy duty bearings for continuous use; quick change amplitude; enclosed shaft housing; vibration absorbing, self-aligning belts.
Electrical System: 1 hp motor; 3450 rpm motor allows for use of a high-energy shaft to impart greater action to the tub; water tight cord connection; water tight electrical box; single phase.

Internal Compound System: Self-contained recirculating system, which cuts down on water usage and waste disposal; easily converted to permanent installation with room underneath for plumbling for full flow-through operation.

Shipping Weight AVT-250: 500 lbs, 15 cubic feet
Shipping Weight AVT-250 System: 633 lbs, 32.75 cubic

http://www.travers.com/avt-250-110v-fastfinisher-raytech/p/69-123-133/


Phone number ✆ +1 256-558-2387

Cardiff, Alabama

Contact seller Share

Related listings

  • Bosch 18v Lithium Battery And Charger
    TOOLS - Chatom (Alabama) - February 21, 2017 35.00 $

    Bosch 18v Lithium Battery And Charger ⭕ Lost the drill and the other battery. Have no need for this battery and charger. Used very little. Cost $100 brand new. I will take $50 Text or email is best. Phone number ✆ +1 938-813-9033 Chatom, Alabama

  • Porter Cable Scroll Saw
    TOOLS - Luverne (Alabama) - February 21, 2017 125.00 $

    Porter Cable Scroll Saw ⭕ This saw is in great condition. We only used it a handful of times. We paid $199 for it at Lowes. The price is not negotiable since it is basically new. Phone number ✆ +1 251-418-9834 Luverne, Alabama

  • LOWES GIFT CARD
    TOOLS - Centerville (Alabama) - February 21, 2017 35.00 $

    LOWES GIFT CARD ⭕ I HAVE A LOWES GC WITH $46.03 WHICH CAN BE VERIFIED FOR $35 CALL Phone number ✆ +1 938-419-3535 Centerville, Alabama

  • Snap On Impacts
    TOOLS - Dickinson (Alabama) - February 19, 2017 500.00 $

    Snap On Impacts ⭕ Two snap on MG725 1/2 air impact guns. I just paid 400$ to the snap on dealer to have them refreshed, they run great and have tons of power. Try them at my shop. Cost over 400$ new. 300$ each or 500$ for both. Trade barter Ecotec Ch...

  • Milwaukee 6 Straight Grinder 5243 Like New, Used 1 Job
    TOOLS - Rogersville (Alabama) - February 19, 2017 200.00 $

    Milwaukee 6 Straight Grinder 5243 Like New, Used 1 Job ⭕ Bought this grinder new for 1 small job, finished with it. Its been sitting for a few months now, so were getting rid of it. Still has the 1st wheel ever used installed on it, so you can see ho...

  • Sears Craftsman 10 2.5 HP Table Saw
    TOOLS - Madison (Alabama) - February 19, 2017 100.00 $

    Sears Craftsman 10 2.5 HP Table Saw ⭕ Sears Craftsman 10 2.5 HP table saw. Works Fine. Minimal use. $100.00 Call/text Phone number ✆ +1 256-252-3842 Madison, Alabama

  • Sears Craftsman 1.5 HP Router
    TOOLS - Trussville (Alabama) - February 19, 2017 45.00 $

    Sears Craftsman 1.5 HP Router ⭕ Sears Craftsman 1.5 HP router with dust bag. Works Fine. Minimal use. $45.00 Call/text Phone number ✆ +1 938-272-2808 Trussville, Alabama

  • Porter Cable Nailer/Stapler
    TOOLS - Tarrant (Alabama) - February 18, 2017 25.00 $

    Porter Cable Nailer/Stapler ⭕ For Sale. Porter Cable Nailer/Stapler. Asking $25. Open Monday thru Saturday From 9am til 6pm. We are located a block west of Rock-N-Roll Hardees. In between Starship Billiards and True Value Hardware. Phone number ✆ +1 ...

  • Blue Point/ Snap On Wire Tools
    TOOLS - Hueytown (Alabama) - February 18, 2017 30.00 $

    Blue Point/ Snap On Wire Tools ⭕ If ads still up I still have text Phone number ✆ +1 205-916-4373 Hueytown, Alabama

  • Welding Machine 120amps 230volt - Flux And Mig Welder - Brand New
    TOOLS - Hayden (Alabama) - February 17, 2017 200.00 $

    Welding Machine 120amps 230volt - Flux And Mig Welder - Brand New ⭕ Flux and Mig Welder -120 amps 230 volt. Brand New - Never used. Still in box. Comes with 2# spool of flux wire, hand-held shade face shield, brush hammer & wheel kit, spare tips & mo...

  • Delta Unisaw
    TOOLS - Dadeville (Alabama) - February 17, 2017 550.00 $

    Delta Unisaw ⭕ Restored 1950s Delta Unisaw, 3 Phase Motor. Phone number ✆ +1 938-629-7718 Dadeville, Alabama

  • Dayton 5000 Watt Portable Generator
    TOOLS - Cherokee (Alabama) - February 17, 2017 400.00 $

    Dayton 5000 Watt Portable Generator ⭕ For Sale: Dayton 5000 Watt portable generator. 11 hp. B&S I/C Industrial / Commercial Engine Cast Iron Bore Magnetron. Great /clean condition very little use about 15 yrs. old.Asking $400. Phone number ✆ +1 938-3...

  • Heated Parts Washer
    TOOLS - McCalla (Alabama) - February 17, 2017 1400.00 $

    Heated Parts Washer ⭕ Works great only thing it needs is the basket spinner motor needs to be hooked back up other than that it works great new heating element Phone number ✆ +1 256-801-1805 McCalla, Alabama

Comments

    Leave your comment (spam and offensive messages will be removed)