700.00 $ Large Size - Entertainment Center Gates
- Location: Gates, Oregon, United States
Large Size - Entertainment Center
I got it 99% complete, then... Well Ill just say, that I never got to finish it, or use it.
All it needs is a final sanding, and final coat of paint.
Oh, from moving it around by clumsy movers, that dragged it as opposed to lifting it, or putting it on a dolly, some of the small wheels got damaged.
This thing is heavy!
It was totally constructed out of 3/4 inch plywood, that was actually doubled all around the outer walls, then most of the load bearing horizontal sections.
It was carefully, specifically designed to accommodate a fifty-five inch television, and all the various extra components I had.
I knew that the best location for my receiver, and some other heavy components, would actually be above the television.
The receiver itself probably weighed at least fifty pounds. So I knew I would have to do some special construction on this, with all that weight above a very expensive television.
What I did was buy four lengths of 1 1/2 wide, steel angle iron, and embeded it into the shelf that the television sat on, then the shelf above the television.
With that design, I could probably park a small car on the top of this unit, and wouldnt have to worry about the television in the middle of it.
The double wall construction was a unique build in itself. The way I designed it, each piece of 3/4 inch plywood kind-of interlocked with another.
Almost as if, all the material started out being, one, and one half inch thick, and dado cuts were made for three/quarter inch material.
The way I interlocked all the pieces, made this unit virtually indescribable. Also, everything was glued and screwed.
I dont fool around when I build something, lol!
In the back of the unit, I cut large slots in some of the shelves for wire and cable runs. And on other shelves, cut in a recess, also for wire and cable runs.
If you notice from the pictures, the base of the unit looks like two separate columns of shelves.
I did this for a specific purpose and reason. The sub-woofer was to be located centered under the television.
I did not want the sub-woofer sitting on a shelf, connected to the rest of the unit.
Because of the strong extreme vibrations of the sub-woofer, it would have caused all the other components to vibrate right off their shelves.
Also, the vibrations would had interfeared with CD and DVD playing.
So, the sub-woofer would had been placed directly on the floor, but still a part of the whole entertainment center.
Its truly unique, and all of my own design.
This is the third entertainment center I had built, using some of these designs, and the first worked extremely well.
Again, it needs a little finish sanding, and a final coat of paint. Most of that in the rear of the unit. I mean it certainly can be used as it is...
Oh, and maybe some new casters if youre going to move it around.
I must confess, I cant even begin to estimate how much money I have just in material in this unit.
And I wouldnt even want to think back to how many hours Ive invested in this!
But it went on for months...
I actually have to build another, very similar to this, but smaller.
But because of the embedded steel angle iron, I wouldnt even want to think about cutting this down!
I do have exact measurements of the entire unit, as well as each shelf or section.
I do still have my original design drawing, with all the diamentions shown, but its kind-of buried at the moment.
I will for the moment estimate that the entire unit is about six foot long, six foot high, and about twenty-four inches in depth.
And I wont even give an estimate on the weight...
For anyone really interested, I will dig out the exact measurements.
Its really hard for me to list a price on this. I know its not going to bring a lot of interest.
Its one of those things that only just the right person, would go nuts for.
Right now its just sitting in storage, and being used as shelves for other things.
Oh... Roughly the entire cabinet is about 6 foot high, 6 foot wide, and about 20 inches deep.
I dont know... Ill just throw out $700 and see what happens.
Phone number ✆ +1 541-792-8415
Gates, Oregon
Related listings
-
Bird Cage With BirdsFURNITURE - Westlake (Oregon) - June 20, 2024 1.00 $
Bird Cage With Birds ⭕ I am selling a nice,big sturdy bird cage on pedestal (was over 400.00 when new) Have 2 young cockateils to go with it (150.00 each when bought) 1 is a pied,13 weeks old (grey)..the other is a pearl,14 weeks old (yellow) beautif...
-
Entertainment CenterFURNITURE - Scotts Mills (Oregon) - June 19, 2024 75.00 $
Entertainment Center ⭕ Entertainment center Phone number ✆ +1 971-385-7905 Scotts Mills, Oregon
-
Lazy Boy Sofa And Matching ChairFURNITURE - Lake Oswego (Oregon) - June 19, 2024 400.00 $
Lazy Boy Sofa And Matching Chair ⭕ UP FOR SALE: Lazy Boy sofa and matching chair. They are approximately 4 years old. The color is what I would call chocolate brown. There are no stains or tears in the fabric material. My home is pet and smoke free. ...
-
KIDS RECLINERS - Lots To Choose From - NEWFURNITURE - Glide (Oregon) - June 18, 2024 100.00 $
KIDS RECLINERS - Lots To Choose From - NEW ⭕ Lots of colors and patterns to choose from. Normally $250, now $100. Thanks! -Eric @ Dan Dan the Mattress Man Follow this link for more DanDan specials: http://saginaw..org/search/sss?sort=rel&query=unclee...
-
LAZY BOY FURNITUREFURNITURE - Durkee (Oregon) - June 18, 2024 275.00 $
LAZY BOY FURNITURE ⭕ Great condition matching couch and loveseat $275 Must sell ASAP Located in Greenville Phone number ✆ +1 503-366-3783 Durkee, Oregon
-
Mirror Square Cherry FrameFURNITURE - Odell (Oregon) - June 18, 2024 25.00 $
Mirror Square Cherry Frame ⭕ 44 x 44-5/8in Tall. With extra to mount 49in Tall RE951 Revitalizations LLC 138 W. Central Ave Petal, MS 39465 Phone number ✆ +1 971-970-6979 Odell, Oregon
-
Outdoor Bistro SetFURNITURE - Summerville (Oregon) - June 17, 2024 550.00 $
Outdoor Bistro Set ⭕ Very beautiful outdoor Bistro Set used one summer. In great condition. Cushions are peacock and Java colored. Everything else is java. Need gone asap. Moving out of town and wont be able to take with me. CASH ONLY Phone number ✆ ...
-
DresserFURNITURE - Sublimity (Oregon) - June 16, 2024 75.00 $
Dresser ⭕ Small 4 drawer dresser for sale for $75.00. Call phone number listed. Phone number ✆ +1 458-687-7998 Sublimity, Oregon
-
West Elm Parson Rectangle Dining Room Table - Modern / IndustrialFURNITURE - Gervais (Oregon) - June 16, 2024 125.00 $
West Elm Parson Rectangle Dining Room Table - Modern / Industrial ⭕ West Elm Parson rectangle black metal and glass top dining room or kitchen table. Would work well as a desk, too. Very good condition with a few scratches on the glass. Nice clean lo...
-
Bathroom VanityFURNITURE - Boardman (Oregon) - June 16, 2024 850.00 $
Bathroom Vanity ⭕ Must he able to able to pick up. NEW 60x22.5x34.5 double vanity. Solid birch plywood construction veneered. Comes with cultured marble top predrilled faucet holes and sinks. Soft close doors. I ordered the wrong size and just lookin...
-
Bedroom Dresser 8 Draw's All WoodFURNITURE - Eddyville (Oregon) - June 15, 2024 125.00 $
Bedroom Dresser 8 Draw's All Wood ⭕ Bedroom dresser 8 draws all wood Phone number ✆ +1 458-593-1305 Eddyville, Oregon
-
Wine/BarTableFURNITURE - Drain (Oregon) - June 15, 2024 35.00 $
Wine/BarTable ⭕ Two glass shelves, metal frame with stemware rack for glasses and storage rack for bottles. Phone number ✆ +1 971-371-4754 Drain, Oregon
-
Bed Frame For Queen Sized BedFURNITURE - Ione (Oregon) - June 15, 2024 150.00 $
Bed Frame For Queen Sized Bed ⭕ Hello, Im selling a black bed frame for a queen sized bed. Its in good condition and only had for about a year. Contact me for more info! Moving and would like to sell it ASAP. Thanks. Text is best! Phone number ✆ +1 9...
Comments
Leave your comment (spam and offensive messages will be removed)