1994.00 $ Bomb-Proof Commuter Bike Stockton

Published date: February 20, 2017
  • Location: Stockton, Kansas, United States

Bomb-Proof Commuter Bike


⭕ Building a Bomb-proof Commuting Bicycle

For the past few years Ive been commuting and running errands on my long distance touring bicycle. Besides being a most comfortable bike, it
is outfitted with racks and empty panniers so I feel ready for any cargo hauling situation that may arise. Last week while I was out for a
leisurely ride zipping along on a 16 pound carbon-fiber road bike and feeling especially lite & free, I asked myself what exactly were the
differences between a touring bike and a commuting bicycle. I went over the basic criteria for a commuting bike while I rode along.
(I get the best ideas and insight while on a bike.)

Below are my thoughts:

1. A commuting bike needs to be reasonably light weight for lifting up stairways, into elevators etc.
2. The bicycle should be simple with few moving parts and have very intuitive controls.
3. A commuting bike needs some form of rack and bag system for carrying paperwork, change of clothes, lunch etc.
4. The bike should have flat-free tires to eliminate messy tire changes and delays.
5. It should be relatively narrow to negotiate traffic and/or pedestrians.
6. A commuting bicycle needs a full-time lighting system which is not dependant on batteries, charging or switches.
7. It should have at least two gears, one for the flatland and one for headwinds or hills.
8. The bicycle should have multiple hand positions with quick access to brake levers.
9. A bright color and reflective strips along with always-on lights is advised.
10. Weather proofing for saddle, panniers, electrical devices, drive-train and rider i.e. mud guards/fenders.


Armed with this list, I set out to build my version of the bomb-proof commuting bike.

The Frame:
I enjoy the quick handling of a road specific bike but many of the modern offerings are much too fragile for an every-day commuter. Carbon
-fiber and lite weight alloy frames are not capable of being fitted with racks strong enough to carry work related supplies. So I had to seek
out a road frame from a former era. A quick search on Craigs List turned up a large selection of mid 1980s to early 1990s quality steel
road frames. I settled on a gold 1994 Bianchi Premio frame. The frame had minimal surface rust but the bottom bracket and headset were
pretty much shot. The frame also has a lot of attachment points for water bottles and fenders. Although it is a steel bike, I was surprised
at the light weight of the frame. Older quality steel frames are a great starting point for creating a commuter bike.

The Fork:
To save on additional weight, I opted to use a LOOK carbon front fork. I just happened to have this item in the corner of my shop. Most stock
steel road bike forks will also work fine for a commuter bike.

The wheels:
Rear Wheel
This part of the build took a lot of thought. For a commuter bike it is best to avoid greasy derailleur systems, thus internally geared hubs
(IGH) are often used on modern commuters. The straight chain-line and enclosed gears are very clean and neat as well as being user friendly.
They almost never need adjusting and are very easy to shift, even while standing still at traffic lights. The Bianchi frame has a rear
dropout with an over-lock-nut distance (OLD) of 120mm so I was limited in the selection of hubs which were available. I also wanted a hub
that would take 36 spokes for extra strength & durability. I finally settled on a Sturmey Archer S2 2Spd Duomatic Kick Shift Hub. This hub
has only two speeds, one for flat ground and one for hills. It is a very straight forward and robust hub system. This hub uses no cables or
shift levers of any kind but relies on a simple back pedal motion in order to shift gears. As a bonus this hub also came in various colors so
I chose gold to match the Bianchi frame. I mated this hub to a Weinmann DP18 deep V style 700c rim with straight 14 gauge stainless spokes.
The overall effect was both utilitarian and attractive. The cherry on top was the addition of a recent addition to the cycling world from
Korea, the Tannus Tire. These tires are completely air-less. They use a solid polymer cell structure to replace a pneumatic tube & tire. This
results in a bike tire that closely matches premium pneumatic city bike tires rolling resistance but with no chance of ever going flat. The
tires come in various widths and colors. I chose a 23mm tire in the color yellow to match the bike.

Front Wheel
For a front wheel I wanted to use a dynohub of some kind to supply constant power for headlight, tail light and for charging devices such as
tablets and cellular phones. Some of the best on the market today are the SON28 hub manufactured in Germany by Wilfried Schmidt Maschinenbau and the PV-8 manufactured in Taiwan by Shutter Precision. I chose a black SON28 dynohub mated to a Weinmann DP18 deep V style 700c rim with 36 straight 14 gauge stainless spokes. This system puts out 6 volts & 3 watts of power capable of running lights and charging peripheral devices simultaneously.

Saddle:
There are many quality saddles available on the market but for comfort and resistance to the weather, my choice is a vintage Bianchi saddle. I located this one in Greece. It is new/old stock and a very strong waterproof comfortable saddle.

Handlebars & Controls:
Because this build uses the kick-back hub, there is no need for either front or rear shifters. I found a vintage Italia Modela 8X Tenos alloy
drop-bar from 1995 and outfitted it with both Tektro RL340 Aero Road Bike Brake Levers and Tektro RL720 In-line Brake Levers so the bike can be ridden in an upright position or down in the drops without compromising safety. The bars were wrapped with vintage Benotto nylon bar tape for appearance and protection from the elements. I chose a gold color tape to match the bike frame as well as yellow brake cable housings. These drop-bars are moderately narrow so they work well while riding in traffic.

Rack & Panniers:
I located a narrow bicycle rack which was supported by rear rack bosses and lower drop-out threaded eyelets. This rack also has a mounting
bracket for a tail-light. Ortlieb panniers were an obvious choice for their waterproofing and I chose a pair of front rollers in a bright
yellow color. These smaller panniers fit well on a road bike framework and also set back farther to the rear to eliminate heal strikes. The
yellow color with Ortlieb trademark reflective patches are very high visibility.

Lighting:
Lighting is provided by a fork mounted Hermans H-One S headlight at 95 Lux brightness. This is enough power to not only be seen but also see
clearly the roadway ahead even in unlighted areas. Rear tail-light is a rack mounted B&M Toplight Line Plus with stand-light which holds power
for five minutes after a complete stop. I also installed a SPANNINGA Pixeo saddle post tail-light for extra security. All three of these
lights are always on and use no batteries. I have used this system for years and have yet to burn out a lamp bulb. The switches on most
battery operated lights usually will fail before the bulbs do on a dynohub lighting system.


Weight:
The completed bicycle including clip-less pedals, two water bottles, rack & panniers and lights weighs in at just under 30 pounds. Because of
the compact sleek profile, this bike feels a whole lot lighter than that and is easily maneuvered and lifted onto trains, buses or up
stairs. Removing one of the panniers and a water bottle cage/bottle reduces the weight to 27lbs 4oz., which is a reasonable weight for a full
time steel commuter bike.

In summary, this bicycle has no need for gear adjustments or tire repair for approximately 9,000 - 12,000 miles (depending on road
conditions). It is as close to a maintenance free, user friendly, comfortable, safe, commuter bike as can be imagined. For these reasons I
call it bomb-proof.


Phone number ✆ +1 913-949-6606

Stockton, Kansas

Contact seller Share

Related listings

  • Boys Bike
    BICYCLES - Independence (Kansas) - February 20, 2017 30.00 $

    Boys Bike ⭕ Nice boys bike less than 1yr old. Has little use. Not sure abt size but is built for a 6 to 12yr old size. Excellent condition. Pacific model paid 129.00 for last summer. Asking 30.00. Pic up in foraker. Phone number ✆ +1 913-177-1926 Ind...

  • Raleigh Super Record - 10 Speed Road Bike
    BICYCLES - Cheney (Kansas) - February 20, 2017 60.00 $

    Raleigh Super Record - 10 Speed Road Bike ⭕ Raleigh Super Record 10 speed bicycle. It is from the late 70s or early 80s. This is a really nice bike, rides great! Im not sure of the exact size, but it is a little too big for me and Im 510. It would be...

  • Huffy Trail Runner 24 Girls Mountain Bike
    BICYCLES - Climax (Kansas) - February 20, 2017 30.00 $

    Huffy Trail Runner 24 Girls Mountain Bike ⭕ Bike is in good condition, just needs some cleaning. My daughter has outgrown it. Phone number ✆ +1 785-794-4044 Climax, Kansas

  • Huffy Mountain Bike
    BICYCLES - Yates Center (Kansas) - February 19, 2017 80.00 $

    Huffy Mountain Bike ⭕ I have a neon green Huffy mountain bike for sale. It is like new. It was only ridden a couple times. I am asking $80 O.B.O. You can contact me by calling or texting at Phone number ✆ +1 316-740-3740 Yates Center, Kansas

  • Used Bike
    BICYCLES - Lone Elm (Kansas) - February 19, 2017 25.00 $

    Used Bike ⭕ Have a used old small bike Only right handle bar works if squeezed hard Hmu asap Pick up No refunds Phone number ✆ +1 913-805-7690 Lone Elm, Kansas

  • Custom Fit And Build Services For Road And Triathlon Bikes
    BICYCLES - Caldwell (Kansas) - February 18, 2017 1.00 $

    Custom Fit And Build Services For Road And Triathlon Bikes ⭕ Performance, efficiency and injury prevention are most influenced by how your bike fits. We are devoted to the Fit First principle. If you are a competing athlete or casual rider that wants...

  • SS Motobecane Urban 58cm.
    BICYCLES - Ozawkie (Kansas) - February 18, 2017 250.00 $

    SS Motobecane Urban 58cm. ⭕ New build single speed, gravel or urban aluminum road bike. Rear hub is freewheel ONLY. Driveline angle is excellent, lots of new parts. 58cm large size fits 510-64. Bike needs nothing and rides great. Call or e-mail Paul,...

  • Giant Nutra 21 Speed Bike
    BICYCLES - Brookville (Kansas) - February 18, 2017 100.00 $

    Giant Nutra 21 Speed Bike ⭕ Giant Nutra 21 Speed Bike,In Good Condition,Call Or Text CLICK ON THE LINK THAT SAYS MORE ADS BY THIS USER Phone number ✆ +1 913-729-5858 Brookville, Kansas

  • 20 Dyno Air GT With Mag GT Wheels (new Phone Number)
    BICYCLES - Elbing (Kansas) - February 18, 2017 100.00 $

    20 Dyno Air GT With Mag GT Wheels (new Phone Number) ⭕ Everything on this bike is original except the seat. Everything needs to be greased on this bike. may need break cables and chain. The chrome is peeling on the forks. There are some nicks & scrat...

  • Nissan Murano Zksd
    BICYCLES - Horton (Kansas) - February 17, 2017 2.00 $

    Nissan Murano Zksd ⭕ Braking Assist 14aly33@gmail.com Phone number ✆ +1 913-143-1298 Horton, Kansas

  • !!!!!ROAD BIKE!!!!!
    BICYCLES - New Albany (Kansas) - February 16, 2017 100.00 $

    !!!!!ROAD BIKE!!!!! ⭕ Im selling my Windsor road bike. Nothing fancy and it has a rattle can paint job (black with white checkers). I believe it a 3 speed on the front and 10 on the rear. Large frame. Great college bike or cruise around town. Probabl...

  • Magna 18 Speed 26
    BICYCLES - New Strawn (Kansas) - February 16, 2017 40.00 $

    Magna 18 Speed 26 ⭕ Magna 26 she series bike 18 speed index shifting Great Divide DH1 series Phone number ✆ +1 913-506-4666 New Strawn, Kansas

  • 2013 Surly Cross Check 54cm
    BICYCLES - Lakin (Kansas) - February 16, 2017 799.00 $

    2013 Surly Cross Check 54cm ⭕ 2013 Surly CrossCheck 54 cm Robins Egg Blue FSA Crankset Shimano 105 rear derailuer DuraAce index shifters Kenda Cross tires 95% Conti Tires 75% Salsa Cross Bar Origin 8 seatpost Origin 8 headset Rolf wheelset Few scratc...

Comments

    Leave your comment (spam and offensive messages will be removed)